11.5 Areas
Measuring point groups can be organized into areas.
See also Measuring point groups, page 39.
Creating and editing an area
• Click on the New area button to create a new area.
Areas already created are displayed in a list.
• Click on the Actions button and then on Edit to display and edit the
settings.
The following settings can be defined and edited:
• Display name: designation of the area (required field).
• Description: description of the area.
• Save: click on the button to save the settings.
• Delete: click on the button to delete the area.
Deleting an area
• Click on the Actions button and then on Delete to delete the area.
11.6 WiFi data loggers
A summary of all WiFi data loggers logged on is displayed.
• Click on the Details button to display more information.
• Click on the Deactivate or Activate button to deactivate or activate WiFi
data loggers.
Configuring a WiFi data logger
• Click on the Configure button to change the configuration.
The following settings can be defined and edited:
• Name of the WiFi data logger: designation of the WiFi data logger
(required field). Condition at delivery: Model_Serial number
• Description: description of the WiFi data logger.
• Select battery type: set the battery type used. For the battery capacity
to be displayed correctly, the correct battery type must be selected.
• Display: switch the display of the WiFi data logger on or off.
• Name of the measuring point: designation of the measuring point
(required field).
• Measuring cycle: interval at which readings are obtained. Set the
measuring cycle using the slide control.
To Next Page
Loading...
