•
•
3-2
Entering the menu mode and printing the
configuration report
•
Entering the test mode and printing the
status report
Entering the menu mode and printing the
character set report
•
Returning
to
normal mode
Normal Mode
Legends in white above and
below panel keys are active in normal mode
Key sequence
for
entering
normal mode:
1.
On when printer
is on line.
2. Blinks when
inter-
face problem exists.
3.
Blinks when not
in normal mode.
Blinks once per
second when
out
of
paper.
Blinks for each
character
received from host.
Print
Features
Enh~:®'i2
0"°"
A B
16
C
12 0
10
F E
Draft
1.
Turns on when nonrecoverable
power-up error
is
detected.
2. Blinks 5 times per second
when a carriage movement
error is detected.
3.
Blinks once per second when
a communication or operator
error is detected.
Normal
1.
Press to move paper
up one 1 172-inch step
(0.35 mm). Hold key
to
move
10
steps and
then do line feeds.
all errors.
Operations:
Normal printer operations
Press to print
contents
of
print
buffer and move paper
up
to
first line
of
print on next form.
Tab
Set
Tab
Clear
~!:~
,--,
li
e
Fe
d
:.
Power
Press
to
print contents
of
print buffer and move
paper up one line.
Press
to move paper
down
one 1 172-inch step (0.35 mm).
Hold key
to
step
down
continuously.
2222627·17
Figure 3-1.
Normal
Mode
To Next Page
Loading...