Texas Instruments 880 - Default Features

3.5 DEFAULT FEATURES
Table 3-4 summarizes default values of the Print
Features switch positions.
Pressing the
Menu, Accept, and Change keys
simultaneously will cause the printer to beep and
return to default features for all positions of the
Print Features switch and to the default configu-
ration codes.
Table 3-4. Print Features Switch Defaults
Feature Print Features Switch Position
Preset Programmable
Font As defined. Draft
CPI As defined.
10
LPI 6 6
LM
001 001
132 for 10 CPI
RM 158 for 12CPI 132
220 for 16-2/3 CPI
TM 001 001
BM 66 See Table 3-3
FL
66
See Table 3-3
Perfskip
OFF OFF
3-18
CAUTION
Before using this three-key tech-
nique to recall defaults, make sure
that returning to configuration
code defaults will not cause a loss
of communication with the host.
Table 3-5. Default Configuration Codes
Config.
Code Default
Communication Mode
14
Baud Rate
27
Parity
36
National Language
41
Miscellaneous
81
9B
All
Others
Table 3-6. Default Character
Set Designations
GO = G1 = G2 = G3 = GOTHIC
GL = GO
GR = G1
ON
ON
ON
ON
ON
ON
OFF