3.3.1.3
Checking
Host-Controlled
Margins.
The left, right,
top,
and bottom margins (LM, RM,
TM, and BM) are
controlled by the host software.
Printing the form report shows
how
the margins
have been set. Print the form report and press the
Normal
key
to
return printer control to the host.
3.3.2
Configuration
Report
and
Menu
The following features can
be
selected on the con-
trol panel (Figure 3-4) from the configuration
menu:
•
•
•
•
•
Communication mode
Baud rate
Parity
National language
Miscellaneous
features
Menu Mode
Configuration Report and Menu
3-8
Key sequence
for
1.
printing configu-
ration report and
menu:
Command
Print
Features
Press
to
return
to
normal mode.
Enh:onCID'~2
oHO"
A B
16 C
12
D
10 F E
Draft
I
Preset
I
Programmable
Menu
1. Press
to
accept configuration report
printed and print character
set
report
(only
if
optional character set ROMs
are
installed).
2.
Menu
Paper
Out
0
0
Error
2. Press
to
accept configuration menu option
printed and print next configuration option.
3. Operations:
Setting
serial/parallel mode,
baud rate, parity,
national
Accept
language, and miscellaneous
configuration parameters.
On
~~i~~
t
Form
0
Line Feed
•
Power
P
<I
yTab
setTopbD
Set
of
form
Tabb.]
[ ] Tab
1
__
1
Clear
line
D
~
Feed
--
Reset
~~i~~+
--"line
Feed
1. Press
to
reject configuration report printed
and begin printing configuration menu.
2.
Press
to
reject configuration menu option
printed and print next configuration option.
2222627·20
NOTE
Returning
to
normal mode in the middle
of
any option listing will
cause the printer
to
retain the last selection printed.
Figure 3-4.
Menu
Mode
(Configuration
Report
and
Menu)
To Next Page
Loading...