Follow
these steps
to
print
the
character set
report:
1.
Open
the
printhead
door.
2. Press
the
Command
key. The
Normal
indicator
turns
off
and the
Command
indicator
turns
on.
3. Press
the
Menu
key. The
Menu
indica-
tor
turns
on.
The printer immediately
prints a
form
report.
4. Press
the
Accept
key.
The
printer
immediately
prints
a
configuration
report.
5. Press
the
Accept
key again. The
printer
immediately
prints
a
character
set
report.
The
following example shows a typical character
set report.
CHAR:
GO
= GOTHIC
G1
= GOTHIC
G2
= GOTHIC
G3
= GOTHIC
GL =
GO;
GR
=
G1
3.3.3.1
Character
Set
Designations.
See
Section 5
for
an explanation
of
the
GO,
G1, G2,
G3, GL, and
GR
character set designations.
3.3.3.2
Changing
Character
Set
Selections.
Follow these steps
to
make character set selec-
tions:
1.
After
you have printed a character set
report
as
described
in
paragraph 3.3.3,
"Character Set Report and
Menu,"
press
the
Change
key. The printer lists the cur-
rently selected character set
for
GO,
as
shown
in
the
next example.
GO= GOTHIC
2. Press the
Change
key. The printer
now
shows the next character set choice.
GO
= GOTHIC OPTIONAL CHARACTER SET
3. Press the
Accept
key
to
select the
optional character set
for
GO.
(Or,
if
you
have other character set
ROMs installed,
you can keep pressing the
Change
key,
and the other character set choices
will
be
listed until you press the
Accept
key
to
select one.) The printer
now
underlines
your choice
for
GO
and lists the currently
selected
character set choice
for
G1,
as
shown in the following example.
GO
= GOTHIC OPTIONAL CHARACTER SET
G1
= GOTHIC
4.
Press
the
Change
and
Accept
keys
to
make selections
for
G1
through
G3
in the
same manner you made the
GO
character
set
selection.
5.
After
you make character set selections
for
GO
through
G3,
the printer will list the
currently selected character set
for
GL,
as
shown below.
GO
= GOTHIC OPTIONAL CHARACTER SET
G1
= GOTHIC
G2=
GOTHIC
G3
= GOTHIC OPTIONAL CHARACTER SET
GL=
GO
3-15
To Next Page
Loading...