6.
Press
the Change key. The printer
now
lists the next character set choice for
GL.
GO
= GOTHIC OPTIONAL CHARACTER
SET
G1
= GOTHIC
G2=
GOTHIC
G3
= GOTHIC OPTIONAL CHARACTER
SET
GL=
GO
G1
7.
Press
the Change and
Accept·
keys
to
make the desired character set selection
for GL. The choices
are
GO,
G1, G2,
and
G3.
8. After you make a character set selection
for GL, the printer underlines your choice
and
lists the currently selected character
set choice for
GR.
GO= GOTHIC
G1
= GOTHIC
G2=
GOTHIC
G3=
GOTHIC
GL=
GO
G1
GR=
G1
OPTIONAL CHARACTER
SET
OPTIONAL CHARACTER
SET
G2
9.
Press
the
Change
and
Accept
keys
to
make the desired character set selection
for
GR.
The choices
are
G1,
G2,
and
G3.
CHAR:
GO
= OPTIONAL CHARACTER
SET;
G1
= GOTHIC
G2=
GOTHIC;
G3
= OPTIONAL CHARACTER
SET
GL=
G2;
GR
=
G3
10.
After you make the character set selec-
tion for
GR,
the printer prints a new char-
acter set report based on your selections.
3-16
11.
Press
the
Accept
key
to
accept the new
character set report. The printer returns
to
the command mode.
12.
Press
the
Normal
key
to
return
to
the
normal mode.
3.4
PRINTFEATURESSWITCH
There
are
twelve positions
of
the
Print
Features
switch
(See
Figure 3-6):
•
•
•
Host-With
the
Print
Features switch in
the
Host
position, the host
can
control all
printer features.
Preset-With
the
Print
Features switch
in
any
of
the five Preset positions, char-
acters-per-inch and font (draft or
enhanced) are determined by the switch
position.
Other form report features and
character set designations can
be
pro-
grammed
in
the menu mode.
Programmable-With
the
Print
Fea-
tures
switch
in
any
of
the six Pro-
grammable
positions
(A
through
F),
the
active print features
can
be those selected
from the form and character set menus
while the
Print
Features switch was
in
that position. Six different combinations
of
font, characters-per-inch, lines-per-
inch, form length, perforation-skip, verti-
cal tabs, and character set designations
can
be
programmed from the control
panel.
NOTE
The configuration codes
are
the same
for
all
positions
of
the
Print
Features
switch.