SWRU270
Page 3 of 28
1. References
The following references provide additional information on the CC2540, the Texas Instruments
Bluetooth® low energy (BLE) stack, and the BLE specification in general. (All path and file references in
this document assume that the BLE development kit software has been installed to the default path
C:\Texas Instruments\BLE-CC2540\)
1.1 Printed Copy Included in the Box with the Kit
[1] CC2540 Mini Development Kit Quick Start Guide (SWRU272)
1.2 Included with Texas Instruments Bluetooth Low Energy Software Installer
(The software installer is available for download at http://www.ti.com/blestack)
[2] Texas Instruments Bluetooth® Low Energy Software Developer’s Guide (SWRU271)
C:\Texas Instruments\BLE-CC2540\Documents\TI_BLE_Software_Developer's_Guide.pdf
[3] TI BLE Vendor Specific HCI Reference Guide
C:\Texas Instruments\BLE-CC2540\Documents\TI_BLE_Vendor_Specific_HCI_Guide.pdf
1.3 Available from Bluetooth Special Interest Group (SIG)
[4] Specification of the Bluetooth System, Covered Core Package version: 4.0 (30-June-2010)
https://www.bluetooth.org/technical/specifications/adopted.htm