SWRU270
Page 5 of 28
Figure 2
If you do not see it in the list, you can download the framework from Microsoft.
From a hardware standpoint, the Windows PC must contain one free USB port. An additional free USB
port is required in order to use the CC Debugger and the USB Dongle simultaneously.
IAR Embedded Workbench for 8051 development environment is required in order to make changes to
the keyfob software. More information on IAR can be found in [1].
For the keyfob, a small Philips screwdriver (not included in the kit) is required to open up the plastic case,
and a CR2032 coin cell battery (included in the kit) is required for power.
To Next Page
Loading...
Need help?
General
