Texas Instruments TPS65982 - Choose Target (Device Type); Select Target Device

www.ti.com Firmware Installation
9.5 Choose Target (Device Type)
In order for the Flash Center to flash the TPS65982-EVM, the proper Flash or Device type must be
selected. Click the “Choose Target” button to select the Target Device type in this case: SPI Flash →
Winbond/NexFlash → W25Q80 as shown in Figure 19.
Figure 19. Select Target Device
41
SLVUAF8C–June 2015–Revised November 2015 TPS65982 Evaluation Module
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated