eat for 2
nd
zone
Options
Press
to edit,
to select an option,
to change the option,
to accept
P = PA Enabled
A = PA is Audible
F = Fire Enabled
D = PA is Delayed
F = Medical Enabled
Q = Quick Arm On
T = Tamper Enabled
O = Info.LED>Output
Volume
Press
to edit,
-
to enter a value,
to accept
Sounder Options
Press
to edit,
to select an option,
to change the option,
to accept
F = Fire Tones Enabled
E = Entry Tones Enabled
A = Alarm Tones Enabled
X = Exit Tones Enabled
F = Fault Tones Enabled
C = Chime Tones Enabled
S = Service Tones Enabled
K = Use Keypad Areas
Expander Setup
Areas
Use
-
to select expander,
to select network,
to edit,
-
to select
an area, (
= all areas,
= areas A – H and I –P),
to accept
Text
Press
to edit text,
-
to select characters (press the required key the
appropriate number of times),
to accept
. , ? ! 1 @ “ -
M N O 6
Move Cursor
A B C 2
P Q R S 7
Copy Text to Memory
D E F 3
T U V 8
Paste Text from Memory
G H I 4
W X Y Z 9
J K L 5
0 _
Upper, Lower Case, Predictive
Text & Numerical
Auxiliary Input
Press
to edit,
-
to select an input type,
to accept
Not Used
Silence Sounders
Auxiliary Tamper
Global Omit Key
Bell Tamper
Local Omit Key
Remote Reset
PSU Monitor
Line Fault +ve
Defer Auto Arming
Line Fault +ve
Volume
Press
to edit,
-
to enter a value,
to accept
Sounder Options
Press
to edit,
to select an option,
to change the option,
to accept
F = Fire Tones Enabled
E = Entry Tones Enabled
A = Alarm Tones Enabled
X = Exit Tones Enabled
F = Fault Tones Enabled
C = Chime Tones Enabled
S = Service Tones Enabled
System Outputs
Panel Outputs
Digi
Outputs
Com? Channels
RedCARE Pins
Use
-
to select an output,
to edit,
-
to enter an output group,
-
to enter output type,
to accept
Keypad Outputs
Expander Outputs
Use
-
to select device,
to select network,
to select an output,
to
edit,
-
to enter an output group,
-
to enter output type,
to accept
Custom Outputs
Use
to select output,
-
to select a switch,
to edit,
-
to enter an
output group,
-
to enter output type,
to accept
X-10 Outputs
Use
-
to select an output,
to edit,
-
to enter an output group,
-
to enter output type,
-
to enter House/device Number,
to accept
To Next Page
Loading...
