Texecom Premier 24 - 2. Using the Alarm System; Introduction; To access the Arming;User menu

Premier Series Master User Guide Using The Alarm System
INS177 11
2. Using the Alarm System
Introduction
The operation of the system is divided up into two sections, the Arming menu and the
User menu.
To access the Arming menu enter a valid User code
1111
. Once in the
Arming menu, various functions can be selected by using the
*
key. Once a function
has been selected press
#
to access that function.
To access the User menu press
+
followed by
#
. Once in the User menu, various
options can be selected by using the
*
key. Once an option has been selected press
#
to access that option.
To exit from either menu press the
)
key and the display will return to normal.
The diagram on page 12, shows both menus and the functions and options available.
!"
The range of available functions and options will depend on the control panel
being used (some control panels do not support all of the features) and also the
type of user on that system. If a function or option cannot be selected, it may be
that it is not assigned to that user (see page 45 for details).
To access the Arming/User menu, proceed as follows:
The display will normally show the time & date (The top line is programmable).
$$
$<=,$>?$7"&$@>>A
To access the Arming menu enter a valid User code
11112
K($6(=$9"13$3(
%&'$+653,'E
To select the User menu Press
+2
K($6(=$9"13
P5,&$7,1=E
To access the User menu Press
#
K($6(=$9"13$3(
Q.,9$0-,13$C(2E
Press
)
to exit either menu
The display will return to normal.