Texecom Premier 24 - Testing the Sounders and Strobe; To test the Sounders and Strobe, proceed as follows

Premier Series Master User Guide Programming the Alarm System
INS177 35
Testing the Sounders and Strobe
Users with access to this option can test various system outputs to ensure that they operate
correctly. These include any outputs that have been programmed for specific operations i.e.
bringing on floodlights, sounding buzzers etc. The internal sounders, speakers and the
external sounder can also be tested to ensure that they are operating correctly.
!"
Any outputs that have been left ‘On’ will be turned ‘Off’ when the menu is exited.
To test the Sounders and Strobe, proceed as follows:
Enter a valid User code
1111
K($6(=$9"13$3(
%&'$+653,'E
2
Press
+
K($6(=$9"13
P5,&$7,1=E
Press
#
K($6(=$9"13$3(
Q.,9$0-,13$C(2E
Press
-
K($6(=$9"13$3(
K($+653,'$3,535E
Press
#
8=5B$e0+$3($3,53
D,##$.5$$$$$L:;;
Press
3
to select the BELL test
Press
!
to select the STROBE test
Press
0
to select the SPEAKER test
Press
,
to select the USER OUTPUTS test
Press
-
to select the DISPLAY test
i.e. 2 for Speaker test
8=5B$e0+$3($3,53
+F,"N,&$$$$$L:;;
Press
#
to test the selected output
Press
+
, when finished
Press
)
to exit the menu
The display will return to normal.