Premier Series Master User Guide Programming the Alarm System
INS177 47
User Options 2
This menu defines which options are available to the user when their code is entered.
This menu is not available to all users.
Press
*
to scroll through the options and press
$
to select them or use keys
!
-
5
(‘Letter’ = option IS selected, ‘Star’ = option is NOT selected).
The following options are available:
U - User Menu
The selected user has access to the User menu. However, the selected user will only
have access to options assigned in ‘User Config.’ (see page 48 for details).
E - Eng. Program (Engineers only)
Only Available to Engineers.
D - Dual Code
The selected user can only access an area when a second User code (with the ‘Dual
Code’ attribute and also assigned to the same area) is entered. Dual Code users will also
activate the ‘1
st
and 2
nd
Code’ output type.
V - Vacation
The selected user is enabled the first time it is used to disarm the system and can be
used as many times as required. However, it will be automatically deleted the first time
that the User 01 code is used to disarm. Vacation users will only be deleted by the
Master user, once they have been used on the system.
S - Door Strike
The selected user will activate any outputs programmed as ‘Door Strike’, whenever their
codes are entered.
R - Call Rem. PC
The selected user has access to the ‘Call Remote PC’ option, allowing them to initiate a
call to a remote Upload/Download PC (see page 54 for details).
C - Duress Code
The selected user will activate any outputs programmed as ‘Duress’, whenever their
codes are entered.
O - Open/Close
The selected user will report open (disarm) and close (arm) events to an Alarm Receiving
Centre every time they arm or disarm.