Texecom Premier 24 - Setting up Zones for Chime; To setup zones for Chime, proceed as follows

Operating the Alarm System Premier Series User Guide
34 INS177
Setting up Zones for Chime
Users with access to this option will be able to select which zones cause the internal
sounders to chime every time they are activated. Chime would normally be used on a front
door, back door, exit button etc.
!"
Zones will only cause the internal sounders to chime if Chime is turned on (see
page 22 for details on turning Chime on and off).
To setup zones for Chime, proceed as follows:
Enter a valid User code
1111
K($6(=$9"13$3(
%&'$+653,'E
2
Press
+
K($6(=$9"13
P5,&$7,1=E
Press
#
K($6(=$9"13$3(
Q.,9$0-,13$C(2E
Press
&
K($6(=$9"13$3(
0H.3$!B.',$O(1,5
Press
#
O(1,$>>A$+.#,13
*&(13$K((&$$$$$L
Enter the zone number
111
or use the
*
key to search
O(1,$>AT$+.#,13
D"/N$K((&$$$$$$L
Press
$
to select Chime
Once for Chime 1, twice for Chime 2 etc
O(1,$>AT$!B.',$@
D"/N$K((&$$$$$$L
Repeat for other zones if required
Press
+
when finished
Press
)
to exit the menu
The display will return to normal.