Texecom Premier 24 - ENGINEER Reset; To reset the alarm, proceed as follows; ANTI-CODE Reset

Operating the Alarm System Premier Series User Guide
20 INS177
ENGINEER Reset
If the system has been programmed to be reset by an Engineer following an alarm
activation, you will still be able to silence the alarm by entering a valid User code (see
page 19 for details).
!"
The system cannot be armed again until the alarm has been reset.
To reset the alarm, proceed as follows:
Contact the telephone number on the display (if programmed) or
the telephone number on the last page of this User Guide.
ANTI-CODE Reset
If the system has been programmed to be reset using an Anti-Code following an alarm
activation, you will still be able to silence the alarm by entering a valid User code (see
page 19 for details).
!"
The system cannot be armed again until the alarm has been reset.
To reset the alarm, proceed as follows:
Enter a valid User code
1111
8&,55$40+0<$;(&
%13.V/(H,
Press
)
The display will show a random code number i.e. 4281
]=(3,$L$S@^A
4,F#6$L$VVVV
Contact the telephone number on the display (if programmed) or the telephone
number on the last page of this User Guide and quote the random code number.
You will be given a 4-digit Anti-Code i.e. 5624
Enter the Anti-code that has been given to you
]=(3,$L$S@^A
4,F#6$L$T?@S
If the Anti-code is correct, the keypad will chime to indicate that the system
has been reset and the display will return to normal.