EasyManua.ls Logo

Texecom Premier Elite Ricochet Kits

Texecom Premier Elite Ricochet Kits
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Premier Elite Ricochet Kits Quick Guide
INS626 17
UDL/Digi Options
O = Omits & Reinstates
R = Restores
Config.
Press
to edit, - to select option, to accept (only available for Contact ID, SIA Level II, EasyCom Pager
& SMS Messaging)
A = Use Area Acc
A = Activate AV
S = Use SIA I
F = Use GSM First
R = Enable RadioPad
I = Connect Via IP
G = Enable GSM
Digi Options
Press to edit, to select an option, to change the option, to accept
E = Digi is Enabled
B = Blind Dialling
P = Pulse Dialling
W = Call Waiting On
3 = Pulse after 3
A = Dial All Numbers
UDL Options
Press
to edit Call Back number 1, enter the number, to accept
-
= Numbers 0 to 9
Insert a ‘#’
then = Clear Screen
, (3 Second pause)
Insert a ‘
*
’
W (10 Second pause)
Call Back Number 2
Press
to edit Call Back number 2, enter the number, to accept
Call Back Number 3
Press
to edit Call Back number 3, enter the number, to accept
UDL Password
Press
to edit, - to enter number, to accept
UDL options
Press
to edit,
to select an option,
to change option,
to accept
A = DL Attended
L = Armed DL Limited
M = Manual Call-back
A = Any Area Armed
D = Call Defeat On
K = Online RKP = Off)
Rings Required
Press to edit,
-
to enter number of rings, to accept
UDL Dial Attempt
Press
to edit,
-
to enter number of dialling attempts,
to accept
Area Accounts
Use
to select an area,
to edit,
-
to enter account number,
to accept
Setup Modules
Press
to reset communicator
Setup Radio-Pad?
Press
to set-up Radio-Pad, to exit
Pad ARC 1 Pri No
Press
to edit,
-
to enter telephone number,
to accept
Pad ARC 1 Sec No
Press
to edit,
-
to enter telephone number,
to accept
Pad ARC 1 Prefix
Press to edit,
-
to enter pad prefix, to accept
Pad ARC 2 Pri No
Press to edit,
-
to enter telephone number, to accept
Pad ARC 2 Sec No
Press
to edit,
-
to enter telephone number,
to accept
Pad ARC 2 Prefix
Press
to edit,
-
to enter pad prefix,
to accept
Pad ARC 3 Pri No
Press to edit,
-
to enter telephone number, to accept
Pad ARC 3 Sec No
Press to edit,
-
to enter telephone number, to accept
Pad ARC 3 Prefix
Press
to edit,
-
to enter pad prefix,
to accept
Setup AV Module?
Press
to set-up AV Module,
to exit
AV No.1
Press to edit,
-
to enter telephone number, to accept
AV No.2
Press to edit,
-
to enter telephone number, to accept
AV No.3
Press
to edit,
-
to enter telephone number,
to accept
AV Dial Attempts
Press
to edit,
-
to enter number of dialling attempts,
to accept
AV Re-Dial Delay
Press to edit,
-
to enter the re-dial delay, to accept
Setup IP Data?
Press
to set-up IP Module, to exit
ComIP Address
Press
to edit,
-
to enter an IP Address,
to accept
ComIP Port
Press
to edit,
-
to enter a Port Number,
to accept
ComIP Gateway
Press to edit,
-
to enter a Gateway Address, to accept
ComIP Mask
Press to edit,
-
to enter a Subnet Mask, to accept
Polling /SMG IP
Press
to edit,
-
to an IP Address,
to accept
Name/SMG Port
Press
to edit,
-
to a Name,
to accept
Setup GPRS Data?
Press
to set-up Chiron IRIS GPRS Data, to exit
Access Pnt Name
Press to edit,
-
to enter an Access Point Name, to accept
User Name
Press to edit,
-
to enter a User Name, to accept
Password
Press to edit,
-
to enter a Password,
to accept
SMS Centre Pri
Press
to edit,
-
to enter telephone number,
to accept
SMS Centre Sec
Press to edit,
-
to enter telephone number, to accept
Modem Setup Stg.
Press to edit,
-
to enter modem string, to accept
Modem Speed
Press to edit,
-
to enter telephone number, to accept
Pad ESN
View only

Table of Contents

Related product manuals