Premier Elite Ricochet Kits Quick Guide
16 INS626
08: PA Audible 27: Arm Fail 46: Time Arming 65: Detector Mask
09: PA Silent 28: Bell SAB 47: 1
st
Code Entered 66: Fault Present
10: Duress 29: Bell SCB 48: 2
nd
Code Entered 67: LED Control
11:
Fire Alarm
30: Strobe 49: Area Secured 68: Full Armed Entry
12: Medical 31: Switch 12 Volts 50: Part Armed 1 69: Fire Sounder
13: Auxiliary Alarm 32: Detector Reset 51: Part Armed 2 70: Confirmed PA
14: Tamper Alarm 33: Walk Test Active 52: Part Armed 3 71: Confirmed Intruder
15: Alarm Abort 34: Zones Omitted 53: Custom Alarm
16: Ready 35: 24Hr Zones Omit 54: Zone Warning
17: Entry Mode 36: Reset Required 55: Arm Fail Warning
18: 2
nd
Entry Mode 37: Door Strike 56: Forced Entry
Zone:
Use
- to enter a zone number or use to search, - to select a zone output type, to
accept
to select a User code or use to search, to accept
Control Timer:
Use
- to select a Control Timer, to accept
PC Control:
to select a Door Control, to accept
X-10:
Use
to select a an X-10 Output, to accept
Key Attributes Attribute Types
Attributes
Press to edit, - to select attributes, to accept
C = Custom Output 1, Stage A
1 = Use Pulse Timer 1
R = Random
UDL/Digi Options
Reset Digi
Press
to reset communicator
Start Test call
Press
to send test call to the ARC, - to initiate a call to the remote UDL computer (using Call Back
numbers 1, 2 or 3)
Msn Pre Dial Number
Press
to edit, enter call waiting number, to accept
Insert a ‘#’
then = Clear Screen
, (3 Second pause)
Insert a ‘*’
W (10 Second pause)
Program Digi
Use
to select ARC sets 1 - 3, to edit
Protocol
Press
to edit, - to select protocol, to accept
Disabled
EasyCom Pager
Fast Format
SIA Level II
SMS
Primary Number
Press
to edit, - to enter telephone number, to accept
Secondary Number
Press
to edit, - to enter number, to accept
Account Number
Press
to edit, - to enter number, to accept
Dialling Attempts
Press
to edit, - to enter number, to accept
Reporting Channels
Press
to edit, - to select channels, to accept (only available for Fast Format)
Restoring Channels
Press
to edit, - to select channels, to accept (only available for Fast Format)
Open/Close Channels
Press
to edit, - to select channels, to accept (only available for Fast Format)
Reporting Areas
12/24/48/88/168
Press
to edit, - to select an area, ( = all areas, = areas A – H and I –P), to accept (only
available for Contact ID, SIA Level II, EasyCom Pager and SMS Messaging)
Reporting Areas 640
Press
to edit, - to select an area group (1-4), use to select areas A – H and I –P), to accept.
(only available for Contact ID, SIA Level II, EasyCom Pager and SMS Messaging)
Reporting Options
Press
to edit, - to select option, to accept (only available for Contact ID, SIA Level II, EasyCom Pager
and SMS Messaging)
To Next Page
Loading...
