EN
Sewing speed can be varied by the foot control.
The harder you press on the control, the faster the machine runs.
Your machine can be used either as a at-bed, or as a
free-arm model. With the extension table in position, it
provides a working surface as a standard at-bed model.
Be removing the extension table (just pull it o to the left
as shown), the machine converts into a free-arm model.
There are three positions for your presser foot:
1. Lower the presser foot to sew.
2. Raise the lifter to the middle position to insert or remove fabric.
3. Lift it to its highest position to change the presser foot or to remove
thick fabric.
FOOT CONTROL
CONVERTING TO FREE-ARM MACHINE
PRESSER FOOT LIFTER
WARNING: Do not unplug by pulling on the cord.
To unplug, grasp the plug, not the cord.
position 0 - machine
OFF
position I - machine ON
1
3
2
Texi Joy 4864
To Next Page
Loading...
Need help?
General
