EN
Line on the stitch plate help to guide
material evenly.
The numbers on the needle plate
indicate the distance between
the center needle position and the
indicating line.
The numbers in the front indicate in Millimeters.
The numbers in the back indicate in inches.
Reverse stitching is used for reinforcing the ends of the seams.
Press reverse stitch button and sew 4-5 stitches.
(Using foot control, press pedal with pressing reverse stitch button).
Press this button to raise or lower the needle.
Press this button twice to sew a stitch.
1. Turn this dial to set stitch length (setting range: 0 to 4 mm).
2. Turn this dial to (b1, b2, b3) position to set buttonhole step.
REVERSE STITCHING
STITCH LENGTH DIAL
NEEDLE POSITION BUTTON
MARKS ON THE NEEDLE PLATE
needle position
button
Texi Joy 48 65
To Next Page
Loading...
