TFT Extend-A-Gun RC3 User Manual

©Copyright Task Force Tips, Inc. 2004-2018 LIX-530 December 31, 2018 Rev14
11
12” EXTEND-A-GUN RC3
3” Waterway
R = Maximum Nozzle Reaction 900 lbf
NOTE: F1 MUST be less than 3100 lbf. F2 MUST be less than 2200 lbf.
And the proposed installation MUST be capable of withstanding forces of this magnitude.
WARNING
Injury can result from an inadequately supported monitor. The monitor mount must be capable
of supporting the nozzle reaction force which can be as high as 900 lbf. (400 kg). Flanges and
pipe made from plastic are inadequate for monitor mounting and must not be used.
D1 D2 HEIGHT D3 min D3 max
1
118714
219813
320812
421811
522910
62399
D1 D2 HEIGHT D3 min D3 max
2
119814
220813
321812
422911
523910
D1 D2 HEIGHT D3 min D3 max
3
120814
221813
322912
423911
5241010
D1 D2 HEIGHT D3 min D3 max
4
121814
222913
323912
4241011
5251010
D1 D2 HEIGHT D3 min D3 max
5
122914
223913
3241012
4251011
D1 D2 HEIGHT D3 min D3 max
6
123914
2241013
3251012
4261111
CHART FOR MODEL
XGA32 SERIES ONLY
D1 D2 HEIGHT D3 min D3 max
7
1241014
2251013
3261112
4271111
D1 D2 HEIGHT D3 min D3 max
8
1251014
2261113
3271112
4281111
D1 D2 HEIGHT D3 min D3 max
9
1261114
2271113
3281112
D1 D2 HEIGHT D3 min D3 max
10
1271114
2281113
3291212
D1 D2 HEIGHT D3 min D3 max
13
1301214
2311313
D1 D2 HEIGHT D3 min D3 max
19 1 36 14 14
LOAD CHARTS FOR 12” EXTEND-A-GUN RC3 ONLY

TFT Extend-A-Gun RC3 Specifications

General

Brand	TFT
Model	Extend-A-Gun RC3
Category	Firefighting Equipment
Language	English