TFT Extend-A-Gun RC3 - Specifications; Parts Identification

©Copyright Task Force Tips, Inc. 2004-2018 LIX-530 December 31, 2018 Rev14
4
3.1 SPECIFICATIONS
MODEL EXTEND-A-GUN RC3 EXTEND-A-GUN RC4
Waterway Size 3” (76mm) 4" (102mm)
Max Flow 1250 gpm (4800 l/min) 2000 gpm (7600 l/min)
Max Pressure 200 psi (13.8 bar)
Lifting Capabilities 100 lbs (46kg)
Lifting Speed 6 sec
Lowering Speed 12 sec
Voltage 12 or 24 VDC (auto sense)
Operating Temperature Range -30°F to +120°F (-34°C to +49°C)
Current Draw Lifting 8 amps @12 VDC, 4 amps @ 24 VDC
Current Limit 18 amps @ 12 VDC, 9 amps @ 24 VDC
Current At Rest 1/4 amp @ 12 VDC, 1/8 amp @ 24 VDC
Recommended Fuse or
Circuit Breaker Size
20 amp @ 12 VDC, 10 amp @ 24 VDC
Travel 12” (305mm) or 18” (457mm)
3.2 PARTS IDENTIFICATION
MODEL #
SERIAL #
TORNADO INLET
(FITS RC3 ONLY)
CLAMP
Fig 3.2