Thermal Dynamics 38 Cutmaster User Manual

INSTALLATION 3-6 Manual 0-2964
3.6 Check Air Quality
To test the quality of air, put the RUN / SET switch in the SET (down) position, place a welding filter lens in front of
the torch and turn on the gas. Any oil or moisture in the air will be visible on the lens. Do not start an arc!
A-03385
A
3020
26
28
24
22

Thermal Dynamics 38 Cutmaster Specifications

General

Brand	Thermal Dynamics
Model	38 Cutmaster
Category	Welding System
Language	English