Thermal Dynamics CE CutMaster 50 - Power Supply Replacement; Basic Replacement Parts; Options and Accessories

PARTS LISTS 6-2 Manual 0-2844
6.03 Power Supply Replacement
The following items are included with the replacement power supply: work cable & clamp, gas pressure regulator/
air filter, input power cable, and operating manual.
Qty Description Catalog #
1 CE CutMaster 50 Power Supply, 400VAC, Three-Phase 3-5830
1 CE CutMaster 75 Power Supply, 400VAC, Three-Phase 3-1850
1 CE CutMaster 100 Power Supply, 400VAC, Three-Phase 3-2050
6.04 Basic Replacement Parts
Qty Description Catalog #
1 Fuse
for CE CutMaster 50 9-8110
for CE CutMaster 75, CE CutMaster 100 9-8602
1 Regulator/Filter Assembly Element Replacement 9-4414
1 Input Power Cable, CE 9-8553
6.05 Options and Accessories
Qty Description Catalog #
1 Single-Stage Air Line Filter Kit (includes Filter & Hose) 7-7507
1 Replacement Filter Body 9-7740
1 Replacement Filter Hose (not shown) 9-7742
2 Replacement Filter Element 9-7741
1 Two-Stage Air Line Filter Kit (includes Hose & Mounting Screws) 7-7500
1 Bracket, Filter Mounting (not shown) 9-7535
1 Two-Stage Air Filter Assembly 9-7527
1 First Stage Cartridge 9-1021
1 Second Stage Cartridge 9-1022
Not shown:
1 Extended Work Cable (50 ft/15.2 m) with Clamp 9-8529
1 Wheel Kit (CE CutMaster 50 only) 9-8510
1 Multi-Purpose Cart 7-8888
Single-Stage Filter Kit Two-Stage Air Filter Kit
Art # A-02476
Filter
Element
(Cat. No. 9-7741)
Housing
Cover
Barbed
Fitting
Spring
Assembled Filter
O-ring
(Cat. No. 9-7743)
First & Second
Stage
Cartridges
(as marked)
Art # A-02942