Contents
Warnings, safety, and warranty information 1
How to use this guide 5
Chapter 1 DS 300 Single‑Use Mixer (S.U.M.) overview 7
1.1 Introduction to the DS 300 S.U.M. 8
1.2 Hardware characteristics 9
1.3 BPC characteristics 13
1.3.1 S.U.M. BPC features 13
1.3.2 Open-top mixing configurations 13
1.3.3 Closed-top mixing configurations 14
1.4 Operating characteristics 14
1.4.1 Operating pressure 14
1.4.2 Working volume 14
1.4.3 Dispensing 14
Chapter 2 Setup and operating information 15
2.1 Site preparation 16
2.1.1 Electrical connections 16
2.1.2 Protective earth grounding 16
2.2 Initial setup 16
2.3 Docking station preparation 21
2.4 BPC preparation and setup 23
2.4.1 BPC handling instructions 23
2.4.2 Working volume 24
2.4.3 Liquid transfer 24
2.4.4 Dispensing 24
2.5 BPC loading 24
2.5.1 Open-top liner loading 24
2.5.2 Closed-top BPC loading 27
2.6 Operating information 30
2.6.1 Powering on 30
2.6.2 Height adjustment 30
2.6.3 Motor angle adjustment 31
2.6.4 Reusable bearing hub insertion for open-top liners 31
2.6.5 Drive shaft insertion 32
2.6.6 Drive shaft rotation 35
2.6.7 Controlling agitation 35
To Next Page
Loading...
