1. Remove the security screws from each of the four latches on
either side of the front of the crate (Figure 2.1).
Figure 2.1. Removing security
screws from crate latches
2. Swing the crate door down. The door will create a ramp for
moving items in and out (Figure 2.2).
Support
brace
Crate door and
ramp
Tools
Drive shafts
Figure 2.2. Open DS 300
S.U.M. crate
Thermo Scientific
Chapter 2 | Setup and operating information
HyPerforma DS 300 Single‑Use Mixer User's Guide | 17
To Next Page
Loading...
