HyPerforma DS 300 Single‑Use Mixer User's Guide | 47
Table 4.9. Reusable bearing hub (for open‑top liners) part number.
Size Description Cat. no.
50–300 L Reusable bearing hub SV50177.77
Figure 4.7. Reusable bearing
hub for open‑top liners
Table 4.10. Impeller, sleeve, and connector (for open‑top liners) part
numbers.
Drum size Description Sleeve length Cat. no.
50 L
Impeller, sleeve, and connector for
66 cm (26 in.) drive shaft
35.3 cm (13.9 in.) SH30749.11
100 L
Impeller, sleeve, and connector for
83.8 cm (33 in.)
53.1 cm (20.9 in.) SH30749.12
200 L
Impeller, sleeve, and connector for
108 cm (42.5 in.)
77 cm (30.3 in.) SH30749.13
300 L
Impeller, sleeve, and connector for
129.5 cm (51 in.)
96 cm (37.8 in.) SH30749.08
Figure 4.8. Impeller, sleeve,
and connector for open‑top
liners
Thermo Scientific
Chapter 4 | Specifications and part numbers
To Next Page
Loading...
