Thermo Scientific HyPerforma G3Pro - Page 17

Thermo Scientific HyPerforma G3Pro Universal Bioreactor Controller User’s Guide | 15
Chapter 1 | G3Pro overview
The components listed are described below.
• TruFlow—Used to connect the TruFlow gas manifold (see
section 2.1).
• Alarm Relay—Dry contact relay that can be used to activate a
building alarm if a user-configured alarm condition is detected by
the system.
TruFlow gas manifold
Alarm relay
Thermal Control
Unit (TCU)
TruLogic DO
Spare
Spare
Spares
AUX-1–4
AI-1–4
Vessel Adapter
Box (VAB)
Figure 1.4. Lower half of the left side panel.
Figure 1.4 shows the lower portion of the left side panel.