Thermo Scientific Micro-Tech 9201 - Record Results

Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J A-19
2. Press the Start button and the following screen appears.
3. Make sure the belt is running empty, then press the Start button. The
following Auto Spanning screen appears.
4. When the Auto Span procedure is completed, the span percent-error
is displayed.
Record the results and note whether the error is positive or negative.
Record Results
BATCH
AUTO SPANNING
Time remaining 360
Rate xxx.x Tph
Tot xx.xx Tons
READY
ALARM
CALIB
ABORT
BATCH
AUTO SPAN Weights
Run belt, then
press START
READY
ALARM
CALIB
EXIT
START
BATCH
AUTO SPAN COMPLETE
Change Span?
Error x.xx %
READY
ALARM
CALIB
NO
YES
ADV