Need help?Do you have a question about the Thermo Scientific Micro-Tech 9101 and is the answer not in the manual?
General| Brand | Thermo Scientific |
|---|---|
| Model | Micro-Tech 9101 |
| Category | Industrial Electrical |
| Language | English |
Provides a general overview of the Micro-Tech Integrator's design and capabilities.
Crucial warnings and cautions for safe installation, operation, and maintenance.
Instructions for installing the Micro-Tech, including wiring and mounting.
Overview of standard and optional features, menus, and functions.
Technical specifications for the Micro-Tech unit.
Importance and methods for finding the correct belt-scale code for setup.
Steps to collect conveyor and scale parameters required for initialization.
Step-by-step process for software setup, including cold-starting and parameter entry.
Procedure for setting the unit's date via the console.
Procedure for setting the unit's time via the console.
Explanation of the console's display, keypad, soft keys, and status LEDs.
How to operate the Micro-Tech, including viewing the run screen.
Essential calibration routines for ensuring scale accuracy.
Step-by-step guide for performing zero calibration.
Instructions for performing R-Cal span calibration.
Key inspection points for preventative maintenance and basic troubleshooting.
Diagnosing and resolving issues related to load-cell circuitry.
Troubleshooting analog I/O circuitry and optional boards.
Explanation of common Micro-Tech on-screen warnings and their solutions.
Guide on identifying and ordering replacement parts.
List of available spare parts and their part numbers.
Table of belt-scale codes for Thermo Fisher Scientific scales.
Procedures for calibrating belt and establishing test duration.
Details on motherboard jumper configurations for system setup.
Information on digital I/O capabilities and expansion boards.
Parameters and functions for Main Menu 1, including calibration.
Technical details for zero calibration parameters.
Parameters for Main Menu 2, covering display and scale data.
Parameters for scale data, such as capacity and idler settings.
Parameters for Main Menu 3, covering diagnostics and protection.
Managing system protection levels and passwords.
Parameters for Main Menu 4, covering I/O, alarms, and Ethernet.
Defining digital and analog I/O parameters.
Parameters for Main Menu 5, covering communication settings.
Configuring communication ports and parameters.
Parameters for Main Menu 6, covering audit trails and linearization.
Capturing and viewing changes to setup and calibration data.
Procedures for span calibration using weights or chains.
Details on Modbus TCP/IP protocol for communication.
Modbus TCP/IP register mapping for communication.
Information on Profibus-DP protocol and its characteristics.
Procedures for installing the Profibus-DP interface board.
Assigning the slave address for Profibus communication.
Defining how data is received from the Micro-Tech.
Profibus register mapping for various blocks.
Mapping for read block 0 (Status, Alarms, I/O, Dynamic data).
To Next Page
