Introduction
Important Safety Information
1-4 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
Please read the following warnings and cautions before installing,
operating, or maintaining the Micro-Tech.
Please read the following general safety precautions before installing,
operating, or maintaining the Micro-Tech.
CAUTION. Do not install, operate, or perform any maintenance
procedures until you have read all the safety precautions listed
below.
CAUTION. Do not connect power to the electronics or turn on the unit
until you have read and understood this entire manual. The precautions
and procedures presented in this manual must be followed carefully in
order to prevent equipment damage and protect the operator from
possible injury.
CAUTION. Hands and clothing must be kept away from all moving or
rotating parts.
CAUTION. Caution. For North America locations a certified Nema
4/4X bushing must be used for openings. For other locations see your
local Electrical Authorities.
WARNING. Covers over the electronics should always remain in place
during operation. They should be removed only for maintenance
procedures with the machine’s power OFF. Be sure to replace all covers
before resuming operation.
Important
Safety
Information
General Safety
Precautions
To Next Page
Loading...
