Thermo Scientific Micro-Tech 9101 - Mixed Rate Units

Initializing the Micro-Tech
Initializing the Software
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 2-27
The Micro-Tech display should currently look like this, if you chose
mixed units.
1. Metric tonnes per hour (“t/h”) is the default value.
2. Repeatedly press the Choice button to select other rate units (shown
below), then press the Enter button.
 “Lb/h”—Pounds per hour
 “Tph”—Standard tons per hour
 “LTph”—Long tons per hour
 “kg/mn”—Kilograms per minute
 “t/mn”—Metric tonnes per minute
 “Lb/mn”—Pounds per minute
 “T/mn—Standard tons per minute
 “LT/min”—Long tons per minute
 “percent %”
 “kg/h”—Kilograms per hour
3. Press the down-arrow button to bring up the load-cell units screen
(see the next section).
Mixed Rate Units
BATCH
- DISPLAY SCROLL 4 -
Rate Units
> t/h <
READY
ALARM
CALIB
CHOICE