Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 1-1
Chapter 1
Introduction
This manual provides the information you need to install, operate, and
troubleshoot the Micro-Tech. Please read the entire manual before
working with your Micro-Tech. For personal and system safety, and for
the best product performance, make sure you thoroughly understand the
manual before installing or using your Micro-Tech.
The Micro-Tech has been properly packaged for shipment at the factory.
Please inspect all packages for damage before opening the shipping
package, because the carrier is likely responsible for any damage. Once
removed from the package, the Micro-Tech can be safely stored with its
cover and latches secured and with the hole plugs installed. During
storage, do not expose the Micro-Tech to moisture or to temperatures
outside the range of –22 to +158°F (–30° to +70°C).
The Micro-Tech Integrator is a microcomputer-driven instrument used
for deriving rate and quantity of flowing material from signals
representing the weight of a segment of moving material and its
velocity. By processing, these two input signals, the Micro-Tech delivers
visible and electrical outputs representing the rate of material movement
as well as visible and electrical outputs representing the total amount of
material that has passed the weighbridge.
For remote indicating, four options are available, as follows.
Remote totalization.
Remote flow rate, belt loading, or belt speed.
Communications.
Field Bus.
the Micro-
To Next Page
Loading...
