Operation
Calibrating the Micro-Tech
3-6 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
4. Press the Yes button. The total is cleared and today’s date (which in
our example is July 15, 2013) appears as the reset date.
5. To return the Micro-Tech to the operating mode, press the Run
button.
Depending on your particular application, the Micro-Tech should be
calibrated on a daily, weekly, monthly, or other regularly scheduled
basis. You should run the zero calibration routine often to ensure that the
accuracy of the scale is optimized.
To run a zero calibration on your scale, do the following.
1. Make sure the Run screen (see Figure 3–2) is currently being
displayed.
2. Press the Menu button and the “Main Menu 1” screen appears.
the Micro-
RESET TOTAL
SINCE 07-15-2013
0.0 Tons
Press MENU for more
To Next Page
Loading...
