Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J B-31
3. The protection level has now changed from Protected to Limited.
The protection level can be temporarily changed by entering a password
“on the fly” during normal operation. When you try to enter a variable or
select a function that is password protected, and the password is
installed, the following screen is displayed.
You can enter either the Operator or the Service password. However, if
you enter the Operator password and the variable or function requires
the Service password instead, access is denied and the following screen
is displayed.
On-Line Procedure
for Changing
Protection Level
> LIMITED <
PLEASE ENTER
PASSWORD __________
PLEASE ENTER SERVICE
PASSWORD ___________
To Next Page
Loading...
