Initializing the Micro-Tech
Initializing the Software
2-28 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
As a general rule, when setting the load-cell units, use the following as a
guide.
If you are using English units, select pounds.
If you are using metric units, select kg.
The only choices in this menu are to use either pounds or kilograms.
The Micro-Tech display should look something like this.
1. Accept the default value (“Pounds” or “kg”).
2. To choose a different load-cell unit (for example because you are
using a custom load cell in your particular application), press the
Choice button, then press the Enter button.
3. Press the down-arrow button to bring up the maximum scale-
capacity screen (see the next section).
Setting the Load-
Cell Units
Loadcell Units
> Pounds <
To Next Page
Loading...
