Thermo Scientific Micro-Tech 9101 - Test Menu

B-34 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
No.
Parameter
Selection
Description
the password and keep a copy in a safe
place.
To remove a password, just press EDIT and
then ENTER. (Password: Operator.)
6
Software version
Current software and rev installed in the
Micro-Tech
7 Date
DAY
MONTH
YEAR
Enter the date.
A battery operated clock calendar maintains
time and date even if power is removed.
(Password: Service.)
8 Time Enter the time.
A battery operated clock calendar maintains
time and date even if power is removed.
(Password: Service.)
9 Board type slot #1 Analog I/O,
Current Out,
8I 8O SRC,
8I 8O SYN,
PROFIBUS DP,
Communication A,
AD BOARD #2
channels
Defines option pcba in bus slot #1.
The system automatically recognizes when
optional boards are installed.
When a board is acknowledged, the related
information stays in memory even if the
board is removed, until the operator deletes it
by responding YES to the message shown at
power on.
10
Board type slot #2
“
Defines option pcba in bus slot #2.
“
11
Board type slot #3
“
Defines option pcba in bus slot #3.
“
12
Board type slot #4
“
Defines option pcba in bus slot #4.
“
13
Force cold start
ENTER
ATTENTION
ARE YOU SURE ?
YES, RETURN
Confirm cold start
Press yes, otherwise press return
15
Back Light Level
16
Max Load
lb/ft
Here is the Test menu table.
No. Parameter Selection Description
1 LAMP TEST START Keypad LED’s blink on and off.
2
Internal test of
microprocessor
START
Testing ROM, RAM, and
E2PROM.
Test Menu