Thermo Scientific Micro-Tech 9101 - Metric Totalization Units; Setting the Length Units; English Length Units

Initializing the Micro-Tech
Initializing the Software
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 2-23
The Micro-Tech display should currently look like this, if you chose
metric units.
1. Metric tonnes (1,000 kg) is the default value.
2. To choose kilograms (“kg”), press the Choice button (“kg” is
displayed), then press the Enter button.
3. Press the down-arrow button to bring up the length units screen (see
the next section).
This menu allows you to choose the length units used by the Micro-
Tech. Clearly, which length units are available in this menu depends on
the choices you made in previous menus (English, Metric, Mixed).
The Micro-Tech display should currently look like this, if you chose
English units.
Metric Totalization
Units
Setting the
Length Units
English Length Units
BATCH
- DISPLAY SCROLL 2 -
Totalization Units
> tonnes <
READY
ALARM
CALIB
CHOICE
BATCH
- DISPLAY SCROLL 3 -
Length Units
> Feet <
READY
ALARM
CALIB
CHOICE