Thermo Scientific Micro-Tech 9101 - On-Screen Warnings

Maintenance and Troubleshooting
On-Screen Warnings
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 4-21
This section explains the Micro-Tech’s on-screen warnings.
The edited parameter is outside allowable limits.
1. Press the Return button to back step to the previous screen.
Asterisks indicate an out-of-range span calculation.
1. Verify a load was applied to scale. Verify your set-up data.
2. Press the No button.
3. If you press the Yes button, a setting error-message is displayed.
On-Screen
Warnings
Setting Error
Span Out-of-Range
Error
BATCH
- SETTING ERROR -
max xxxxx
min xx
READY
ALARM
CALIB
RETURN
BATCH
AUTO SPAN COMPLETE
Change span?
Error ****** %
READY
ALARM
CALIB
NO
YES
ADV