Thermo Scientific Micro-Tech 9101 - Resetting the Reset and Operator Totals

Operation
Running the Micro-Tech
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 3-5
The Reset and Operator totals can be reset by doing the following.
1. Make sure the Run screen (see Figure 3–2) is currently being
displayed.
2. Press the Totals button and the reset screen appears.
3. Press the Reset button and the confirmation screen appears.
Resetting the Reset
and Operator Totals
BATCH
RESET TOTAL
SINCE 05-21-2013
12.7 Tons
READY
ALARM
CALIB
RESET
BATCH
Do you wish to clear
RESET Total?
READY
ALARM
CALIB
NO
YES