Thermo Scientific Micro-Tech 9101 - Communications Menu

Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J B-53
Here is the Ethernet menu table.
No.
Parameter
Selection
Description
1
IP address
192 168 1 2 (0 - 255)
2 Mask address 255 255 255 0 (0 - 255)
3
Gateway
address
192 168 1 1 (0 - 255)
4
5
6
Mac Address
00-17-27-XX-XX-XX
7
Variables
Selection
Not damped, damped,
displayed
This section lists the technical details for all parameters and functions in
the Micro-Tech’s “Main Menu 5” screen.
The motherboard has one serial channel that can be configured using
jumpers as an RS-232 or an RS-485 channel. The serial channel can be
used for printing or for serial communication with an intelligent device
such as a PLC or a PC. An additional expansion COMM board can also
be installed and programmed. Typically one COMM for the printer and
one for the supervisor.
Here is the Communications menu table.
No. Parameter Selection Description
1
Baud rate port #1
9600, 19200, 110, 150, 300, 600,
1200, 2400, 4800
2
Set parity port #1
No Parity, even parity, odd parity
3
Stop bits port #1
1, 2
Ethernet Settings
Menu
Main Menu 5
Communications
Menu
Communications
Menu Table