Initializing the Micro-Tech
Initializing the Software
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 2-21
This menu allows you to choose what units of measurement the Micro-
Tech uses when displaying its results. The Micro-Tech can display
information using the following units of measurement.
Standard English units—such as pounds, standard tons, and long
tons.
Metric units—such as kilograms and tonnes.
Both English and metric units. (The “Mixed” option.)
1. The Micro-Tech display should currently look like this.
2. The default selection for Measure Units depends on which Language
was selected initially.
3. To choose a different selection (English, Metric, Mixed) repeatedly
press the Choice button until the choice you want is displayed, then
press the Enter button.
4. Press the down-arrow button to bring up the Totalization units
screen.
5. In pages 2-20 through 2-24, do the following.
Follow the “English” headings, if you are using English units.
Follow the “Metric” headings, if you are using metric units.
English/Metric
Measure Units
> English <
To Next Page
Loading...
