Introduction
Symbol Identification
1-18 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
Here are the details of the symbols used on the Micro-Tech.
Table 1–1. Symbol Identification
Alternating current
Earth (ground) TERMINAL
PROTECTIVE CONDUCTOR
TERMINAL
Caution, risk of electric shock
Caution (refer to accompanying
documents)
Conformity with the Low Voltage (LVD) Directive and Electromagnetic
Compatibility (EMC) Directive has been demonstrated using
harmonized European Norm (EN) standards published in the Official
Journal of the European Communities, and International (IEC)
applicable standard used in North America.
The Micro-Tech™ 9000 series comply with the EN and IEC standards
listed below, when properly installed in accordance with this and other
relevant manuals.
CAN/CSA-C22.2 No.61010.1-04
Safety Requirements for Electrical Equipment for Measurement,
To Next Page
Loading...
