Thermo Scientific Micro-Tech 9101 - Page 37

Introduction
Standards Applied
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 1-19
Control, and Laboratory Use.
Part 1: General Requirements.
 UL 6101-1(2nd Edition)
Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use.
Part 1: General Requirements.
 UL 60950-1
Information Technology Equipment—Safety
Part 1: General Requirements.
 IEC/EN 61010-1:2001
Safety requirements for electrical equipment for Measurement,
Control, and laboratory use.
Part 1: General requirements.
The Micro-Tech™ 9000 series has been tested with the EN and IEC
standards listed below.
 IEC/EN 61326-1
Electrical equipment for measurement, control and laboratory use—
EMC requirements.
Part 1: General requirements
 EN 55011
Limits and methods of measurement of radio disturbance
characteristics of industrial, scientific and medical (ISM) radio-
frequency equipment.
 EN 55022
Information technology equipment. Radio disturbance
characteristics. Limits and methods of measurement.
The Micro-Tech™ 9000 series complies with the following EN
directives.
 2006/95/CE—Low Voltage Directive.
 2004/108/CE—EMC Directive.