Thermo Scientific Micro-Tech 9101 - Micro-Tech Features

Introduction
Micro-Tech Features
1-12 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
The following sections give you a quick overview of the Micro-Tech’s
features, functions, and capabilities.
The Micro-Tech Integrator has many hardware and software features
necessary for continuous weighing and outputting totalized weight and
rate information. The standard features of the Micro-Tech are listed
below.
 Menu-driven scroll entries on a four line display.
 Four LED status indicators.
 Visible and electrical outputs representing rate or load of the
material movement.
 Visible and electrical output representing total amount of material
that has passed the weighbridge.
 Audit trail.
 Automatic zero and span calibration.
 Auto zero tracking.
 Several software options that may be turned on by keypad entry or
by installing optional plug-in PC boards.
 Optically coupled digital inputs and outputs.
 Alarms and failure detection.
 Communication standards such as RS232C, RS485, and networking
multi-drop.
 Allen-Bradley DF1 and Modbus RTU.
 Ethernet/IP and Modbus/TCP
The standard Micro-Tech configuration is as follows. For more
information about the Micro-Tech’s communication protocols, see
Appendix C.
 Two load-cell inputs (J16, J21) on a Model 9101 or one load-cell
input (J9) on a Model 9201, to a max of 6 load cells.
 USB port.
 Two serial communication ports.
Micro-Tech
Features
Standard
Features
Inputs and
Outputs