Thermo Scientific Micro-Tech 9201 - Pivot-to-Load-Cell Distance; Number of Weigh Idlers; Pivot-to-First-Idler Distance; Pivot-to-Test-Weight Height

Initializing the Micro-Tech
Initializing the Software
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 2-33
3. Press the Details button, and the first parameter appears. Your list of
parameters will, most likely be different, from the ones shown
below. These are just examples of a typical set-up menu, and are
here to show you how the process works. The general outline is the
same for all systems, but the specifics may be different.
The pivot-to-load cell distance is explained in Figure 2–1. Check the
value. Press the down-arrow button to move on.
Check the value, then press the down-arrow button to move on.
The pivot-to-first-idler distance is explained in Figure 2–3. Check the
value. Press the down-arrow button to move on.
The pivot-to-test-weight height is explained in Figure 2–4. Check the
value. Press the down-arrow button to move on.
The pivot-to-test-weight length is explained in Figure 2–5. Check the
value. Press the down-arrow button to move on.
The pivot-to-carriage height is explained in Figure 2–6. Check the
value. Press the down-arrow button to move on.
The roller-to-stringer height is explained in Figure 2–7. Check the
value. Press the down-arrow button to move on.
Check the value, then press the down-arrow button to move on.
Pivot-to-Load-Cell
Distance
Number of Weigh
Idlers
Pivot-to-First-Idler
Distance
Pivot-to-Test-Weight
Height
Pivot-to-Test-Weight
Length
Pivot-to-Carriage
Height
Roller-to-Stringer
Height
Number of Load Cells