Orion Benchtop pH/ISE Meter Instruction Manual
Overview of Meter Functions-420Aplus, 710Aplus
93
Primary Key Pad Functions,
Orion 420Aplus, 710Aplus
yes Press to enter a value during calibration or
setup. May also be used to scroll through the
setup menu without changing any parameters.
no Press to cancel or to change to a parameter before entering.
measure Press for sample analysis. Instrument will remain in measure
mode until another key is pressed. Press to unlock HOLD
during sample analysis or to exit SETUP menu.
mode Press to change operating modes. The options are pH, mV, or
REL mV. (conc with 710Aplus Meter only)
2nd Press to access second functions (cal, timer, setup or print).
Press to increase value.
Press to decrease value.
power Press to turn meter on or off.
▼
▼
To Next Page
Loading...
Need help?
General
