Think city - Wheel Suspension, Rims and Tires

6. Specifications and Technical Data
68
Wheel Suspension, Rims and Tires
Wheel Suspension, Rims and Tires
Wheel Suspension
Front: Independent springs, MacPherson with stabilizer and
hydraulic shock absorbers.
Rear: Independent springs, torsion rods, stabilizer and
hydraulic shock absorbers.
Wheel Specifications
Front wheel:
Camber: 0.95º ± 0.5º
Caster: (w/power steering) 3.2º ± 0.5º
Toe-in: 0º ± 0.5º
Rear wheel:
Camber: 0.95º ± 0.5º
Toe-in: 0.37º ± 0.147º
Track width*:
Front: 54.6 in.
Rear: 56.3 in.
*Track width applies to standard wheel size (165/65R14 w/0.94
in. oset)
Rims and Tires
The minimum requirement for tread depth is 0.060 in.
It is recommended to change the tires when the tread depth is
less than 0.120 in. because of the danger of hydroplaning.
For snow tires, the requirement is 0.118 in. tread depth.
Standard wheels:
Tire dimension: 165/65R14
Rims: 5.5x14 in. steel
oset 0.94 in.
bolt circle 4 in.
center hole 2.56 in.
Aluminium rims (optional)
Tire dimension: 165/65R14
Rims: 6x14 in. aluminum
oset 0.94 in.
bolt circle 4 in.
center hole 2.56 in.