Think city - Changing the Rear Light Bulbs

5. Service and Maintenance
516
Changing the Rear Light Bulbs
Rear reflector
(no bulb)
Turn signal/
reverse lamp
Brake light/
tail light/
reflector
License plate light
Use a small, flat screwdriver to pry open the
cover. Push in on lock on right side. Loosen the
bulb by turning a half turn counterclockwise.
Insert new bulb in reverse order.
Take out the bad bulb, insert
a new one (check that it
works) and screw the cover
back in place.
Loosen screws to
access the bulbs
High-mounted
brake light
Turn signal/
reverse lamp
Brake light/
tail light/reflector
Changing the Rear Light Bulbs