Think city - The Motor Compartment - Opening and Closing

5. Service and Maintenance
58
The Motor Compartment — Opening/Closing
The Motor Compartment — Opening/Closing
The hood must be opened to check/rell motor coolant,
brake uid, power steering uid and windshield washer uid.
Turn o the motor and set the parking brake before opening
the hood. Pull the hood release handle under the instrument
panel. This will release the hood latch. Li the hood and
support it with the hood support strut.
Be sure the motor and gears are cool before touching any
areas of the motor.
Air intake
Handle to release the hood.
Inertia
sensor
12V
battery
Brake
fluid
Motor
coolant
Windshield
washer
fluid
Power
steering
fluid
Hood
support strut
To close the hood, put the hood support strut back into the
clamp, let the hood down and make sure it is locked (you
should hear a click when it is locked in place).