Thinkware F100 - Setting the Date and Time; Setting the Daylight Saving Time; Setting the Speed Unit; Setting the Speed Stamp

Settings
31
5.3.4 Setting the date and time
Follow the instructions to set the date and time.
1
From the PC Viewer, click Settings
>
Dashcam Setting
>
System Settings.
2
From Date / Time, select the checkbox and set the date and time.
To get the current date and time automatically from your PC, click Get Current Time.
3
Click Save.
5.3.5 Setting the daylight saving time
Follow the instructions to set the daylight saving time.
1
From the PC Viewer, click Settings
>
Dashcam Setting
>
System Settings.
2
From Daylight Saving, select Enabled or Disabled.
3
Click Save.
5.3.6 Setting the speed unit
Follow the instructions to set the speed unit.
1
From the PC Viewer, click Settings
>
Dashcam Setting
>
System Settings.
2
From Speed Unit, select km/h or mph.
3
Click Save.
5.3.7 Setting the speed stamp
Follow the instructions to turn on or off the speed stamp feature.
1
From the PC Viewer, click Settings
>
Dashcam Setting
>
System Settings.
2
From Speed Stamp, select Enabled or Disabled.
3
Click Save.